0024056401 - MUKHNIZAR
| No | Kategori Kegiatan | Authors | Judul Kegiatan | Publikasi | Cited | Quality | Tahun Kegiatan |
|---|---|---|---|---|---|---|---|
| 1 | Google Scholar | Authors : M Mukhnizar, A Afdal, RS Septian | THE EFFECT OF ELECTRIC CURRENT VARIATIONS ON THE MECHANICAL PROPERTIES OF SMAW WELDING RESULTS ON AISI 1045 STEEL | Journal of Scientech Research and Development 7 (1), 1134-1143, 2025 | 0 | 2025 | |
| 2 | Google Scholar | Authors : J Algusra, M Mukhnizar, Z Zulkarnain, R Abu, A Afdal | Pembuatan Mesin Pengiris Tempe | Jurnal Teknik Industri Terintegrasi (JUTIN) 7 (1), 477-482, 2024 | 0 | 2024 | |
| 3 | Google Scholar | Authors : W Widi, M Mukhnizar, V Selviyanty, R Abu, A Afdal | Analisis Kerusakan untuk Tindakan Perawatan pada Mekanika Elevator Otis Kapasitas 2 Ton di RSUP Dr M. Djamil Padang | Jurnal Teknik Industri Terintegrasi (JUTIN) 7 (1), 550-557, 2024 | 0 | 2024 | |
| 4 | Google Scholar | Authors : A Amsal, A Afdal, Z Zulkarnain, R Abu, M Mukhnizar | Perancangan Alat Press Hidrolik Kapasitas 20 Ton | Jurnal Teknik Industri Terintegrasi (JUTIN) 7 (1), 558-563, 2024 | 0 | 2024 | |
| 5 | Google Scholar | Authors : M Mukhnizar, R Abu, K Wanda | TENSILE STRENGTH ANALYSIS OF SPOT WELDING RESULTS ON LOW CARBON STEEL ST40 | Journal of Scientech Research and Development 6 (2), 880-887, 2024 | 0 | 2024 | |
| 6 | Google Scholar | Authors : R Maulana, A Afdal, R Abu, M Mukhnizar, V Selviyanty | Analisis Perbandingan Sifat Mekanik Sambungan Kampuh V Terhadap Kampuh U Hasil Pengelasan SMAW Menggunakan Posisi 3G pada Baja St 37 | Jurnal Teknik Industri Terintegrasi (JUTIN) 7 (1), 543-549, 2024 | 0 | 2024 | |
| 7 | Google Scholar | Authors : M Abdillah, M Mukhnizar, R Abu, A Afdal, Z Zulkarnain | Analisis Kinerja Kompressor Screw Oil Injected Sullair Ls20-150h untuk Ash Handling (Study Kasus PLTU Teluk Sirih) | J. Tek. Ind. Terintegrasi 7 (1), 468-476, 2024 | 2 | 2024 | |
| 8 | Google Scholar | Authors : T Zega, A Afdal, R Abu, M Mukhnizar, A Azman | Analisis Penyebab Kerusakan Mesin Diesel pada Generator Set untuk Tindakan Perawatan di Kapal Tanker MT. Sea Serenity | JURNAL SURYA TEKNIKA 11 (1), 467-471, 2024 | 1 | 2024 | |
| 9 | Google Scholar | Authors : H Pratama, R Abu, Z Zulkarnain, M Mukhnizar, A Azman | Perancangan Tungku Pembakar Logam | Jurnal Teknik Industri Terintegrasi (JUTIN) 7 (1), 536-642, 2024 | 0 | 2024 | |
| 10 | Google Scholar | Authors : M Mukhnizar, R Abu, F Rinaldi | ANALYSIS OF OVERHEAT OF PERTAMAX FUEL DISTRIBUTION PUMP FOR MAINTENANCE ACTION AT PT. PERTAMINA PATRA NIAGA–FUEL TERMINAL MEDAN GROUP | Journal of Scientech Research and Development 6 (1), 1610-1626, 2024 | 0 | 2024 | |
| 11 | Google Scholar | Authors : DP Hihamsyah, M Mukhnizar, R Abu, A Afdal, V Selviyanty | Perancangan Alat Uji Putaran Kritis Poros Menggunakan Digital Counter | Jurnal Teknik Industri Terintegrasi (JUTIN) 7 (1), 528-535, 2024 | 0 | 2024 | |
| 12 | Google Scholar | Authors : A Putra, M Mukhnizar, V Selviyanty, R Abu, A Afdal | Pembuatan Tungku Pembakaran Logam | Jurnal Teknik Industri Terintegrasi (JUTIN) 7 (1), 483-487, 2024 | 1 | 2024 | |
| 13 | Google Scholar | Authors : H Rahman, R Abu, M Mukhnizar, RD Koto | Planning and Design of a Coffee Peeling Machine with a Capacity of 100 Kg/Hour | MOTIVECTION: Journal of Mechanical, Electrical and Industrial Engineering 6 …, 2024 | 1 | 2024 | |
| 14 | Google Scholar | Authors : YA Hidayat, R Abu, M Mukhnizar | PENGUJIAN MESIN PEMBELAH BUAH PINANG | UNES Journal of Scientech Research 8 (2), 15-28, 2023 | 0 | 2023 | |
| 15 | Google Scholar | Authors : S Ahmadi, M Mukhnizar, R Abu, V Selviyanty, A Afdal | Analisis Torsi Sepeda Motor Vixion New 2013 Menggunakan Final Drive Gear Ukuran 13, 14 dan 15 | Jurnal Teknik Industri Terintegrasi (JUTIN) 6 (3), 837-844, 2023 | 0 | 2023 | |
| 16 | Google Scholar | Authors : A Candra | Analisis Penyebab Over Heating Untuk Tindakan Perawatan Pada Screw Compressor Di Pt. Semen Padang Unit Indarung IV | Universitas Ekasakti Padang, 2023 | 2 | 2023 | |
| 17 | Google Scholar | Authors : M Adami, R Abu, M Mukhnizar, A Afdal, Z Zulkarnain | Pengujian Mesin Tempa Logam Dengan Sistem Forging Hammer | Jurnal Teknik, Komputer, Agroteknologi Dan Sains 2 (1), 62-68, 2023 | 3 | 2023 | |
| 18 | Google Scholar | Authors : VP Regia, M Mukhnizar, R Abu | Analysis of Damage to the PGM-FI System in Honda Beat Motorcycle for Maintenance Actions | MOTIVECTION: Journal of Mechanical, Electrical and Industrial Engineering 5 …, 2023 | 0 | 2023 | |
| 19 | Google Scholar | Authors : ZF Herdian, A Afdal, M Mukhnizar, R Abu | PERANCANGAN MESIN BUBUT KAYU KONVENSIONAL | UNES Journal of Scientech Research 8 (1), 066-075, 2023 | 0 | 2023 | |
| 20 | Google Scholar | Authors : BA Pratama, M Mukhnizar, Z Zulkarnain, V Selviyanty, R Abu | Analisis Kenaikan Temperature pada Turbine Guide Bearing untuk Pemeliharaan Periodik Unit 2 PLTA Maninjau | Jurnal Teknik Industri Terintegrasi (JUTIN) 6 (3), 759-769, 2023 | 0 | 2023 | |
| 21 | Google Scholar | Authors : P Fernando, A Risal, M Mukhnizar, A Afdal, V Selviyanty | Perencanaan Mesin Pembuat Serbuk Jahe | Jurnal Teknik Industri Terintegrasi (JUTIN) 6 (3), 828-836, 2023 | 1 | 2023 | |
| 22 | Google Scholar | Authors : H Devin, R Abu, M Mukhnizar | ANALISIS PENURUNAN KINERJA POMPA SENTRIFUGAL EBARA 125 X 100 FS4KA DI KOLAM LATIH WATER PIT POLITEKNIK PELAYARAN SUMATERA BARAT | Jurnal Vokasi Mekanika (VoMek) 5 (4), 385-394, 2023 | 0 | 2023 | |
| 23 | Google Scholar | Authors : J Jimmy, M Mukhnizar, R Abu | PEMBUATAN ALAT UJI PUNTIR | UNES Journal of Scientech Research 8 (2), 01-14, 2023 | 0 | 2023 | |
| 24 | Google Scholar | Authors : R Jufrizal, M Mukhnizar, A Afdal, R Abu, Z Zulkarnain | Pembuatan Alat Uji Putaran Kritis Poros | Jurnal Teknik Industri Terintegrasi (JUTIN) 6 (4), 1659-1665, 2023 | 0 | 2023 | |
| 25 | Google Scholar | Authors : J Algusta | Pembuatan Mesin Pengiris Tempe | Universitas Ekasakti Padang, 2023 | 0 | 2023 | |
| 26 | Google Scholar | Authors : A Septiawan, M Mukhnizar, Z Zulkarnain | Pembuatan Mesin Tempa Logam Dengan System Forging Hammer | Jurnal Teknik, Komputer, Agroteknologi Dan Sains 2 (1), 1-8, 2023 | 5 | 2023 | |
| 27 | Google Scholar | Authors : E Gowasa, A Afdal, V Selviyanty, R Abu, M Mukhnizar | Analisis Perbaikan dan Pemeliharaan Sistem Pendingin (Air Conditioner) Pada Mobil Jazz New | Jurnal Teknik Industri Terintegrasi (JUTIN) 6 (3), 770-780, 2023 | 1 | 2023 | |
| 28 | Google Scholar | Authors : A Putra, M Mukhnizar, R Abu, Z Zulkarnain, A Azman | Analisis Penyebab Turunnya Kinerja Kompresor untuk Tindakan Perawatan pada Kapal Tanker MT. Sea Serenity | Jurnal Teknik Industri Terintegrasi (JUTIN) 6 (4), 1652-1658, 2023 | 4 | 2023 | |
| 29 | Google Scholar | Authors : RE Putra, R Abu, M Mukhnizar | PENGUJIAN MESIN SERUT BAMBU KAPASITAS 500 BATANG/JAM | Journal of Applied Engineering Scienties 6 (1), 001-014, 2023 | 1 | 2023 | |
| 30 | Google Scholar | Authors : M Fajra, J Jama, S Sukardi, D Mallisza, M Mukhnizar, O Dakhi | Contribution of Pedagogical Competence and Transformational Leadership of the Principal to the Implementation of the Tasks of Design and Build Teachers at SMKN 1 Padang | Jurnal Edumaspul 6 (2), 3045-3053, 2022 | 8 | 2022 | |
| 31 | Google Scholar | Authors : I Fauzan, R Abu, VS YH, M Mukhnizar, A Azman | Perencanaan Mesin Pemipih Biji Melinjo Kapasitas 650 Kg/Jam | Jurnal Teknik, Komputer, Agroteknologi Dan Sains 1 (2), 150-162, 2022 | 9 | 2022 | |
| 32 | Google Scholar | Authors : W Irpandi, M Mukhnizar, Z Zulkarnain, R Abu, A Afdal | Analisis Pengaruh Variasi Kecepatan Rata-Rata Konstan Sepeda Motor Yamaha Bensin 4-Langkah Terhadap Konsumsi Bahan Bakar | Jurnal Teknik, Komputer, Agroteknologi Dan Sains 1 (2), 175-186, 2022 | 1 | 2022 | |
| 33 | Google Scholar | Authors : E Satrya, R Abu, M Mukhnizar | Perencanaan Mesin Pengupas Kulit Kacang Tanah Kapasitas 800 kg/jam | AEEJ: Journal of Automotive Engineering and Vocational Education 3 (2), 63-78, 2022 | 2 | 2022 | |
| 34 | Google Scholar | Authors : A Antonnius, A Afdal, M Mukhnizar, R Abu, A Azman | Perencanaan Mesin Tempa Logam Dengan Sistem Forging Hammer | Jurnal Teknik, Komputer, Agroteknologi Dan Sains 1 (2), 163-174, 2022 | 7 | 2022 | |
| 35 | Google Scholar | Authors : R Abu, D Mallisza, V Selviyanti, J Weriza | PKM Optimalisasi Keterampilan Pengelasan (Las Listrik) Pemuda Nagari Iii Aur Melintang Kecamatan Iv Nagari Aur Melintang Kabupaten Padang Pariaman | 11 | 2022 | ||
| 36 | Google Scholar | Authors : N Ifran, A Afdal, M Mukhnizar, R Abu, A Azman | PERENCANAAN ALAT UJI PUNTIR MENGGUNAKAN MOTOR LISTRIK 1 HP 1400 RPM | UNES Journal of Scientech Research 7 (2), 195-207, 2022 | 0 | 2022 | |
| 37 | Google Scholar | Authors : M Mukhnizar | ANALISIS PENGARUH PEMASANGAN SENSOR VIBRASI UNTUK KETELITIAN PENGUKURAN GETARAN BEARING PADA HOUSING BEARING SYMETRO GEAR UNIT RAW MILL DEPARTEMEN PRODUKSI II/III PT. SEMEN PADANG | Journal of Applied Engineering Scienties 2 (1), 039-058 | 0 | 2019 | |
| 38 | Google Scholar | Authors : M Mukhnizar | PEMBUATAN DAN PENGUJIAN KEKUATAN KOMPOSIT SERAT SABUT KELAPA SEBAGAI ALTERNATIF PENGGANTI SERAT GELAS (MAT) DALAM PROSES PEMBUATAN FIBERGLASS | UNES Journal of Scientech Research 3 (1), 017-028, 2018 | 2 | 2018 | |
| 39 | Google Scholar | Authors : M Mukhnizar | ANALISA PENGELASAN BAJA ST 37 DENGAN MEMVARIASIKAN KUAT ARUS DAN PENDINGINAN TERHADAP SIFAT MEKANIK | UNES Journal of Scientech Research 1 (2), 20-27, 2016 | 0 | 2016 | |
| 40 | Google Scholar | Authors : M Mukhnizar | ANALYSIS OF WELDING STEEL ST 37 BY VARYING STRONG FLOW AND COOLING ON MECHANICAL PROPERTIES | UNES Journal Of Scientech research 1 (2), 20-27, 2016 | 0 | 2016 | |
| 41 | Google Scholar | Authors : I Ayesha, M Yurnalis, M Mukhnizar | Perilaku Pengrajin Gula Merah Tebu Tradisional di Nagari Bukik Batabuah, Kecamatan Canduang, Kabupaten Agam | Jurnal Pembangunan Nagari 1 (2), 89-102, 2016 | 13 | 2016 | |
| 42 | Google Scholar | Authors : B Indonesia | Unes Journal of Education Scienties | 0 | 0000 | ||
| 43 | Google Scholar | Authors : AR Fitri, R Abu, M Mukhnizar | Analysis of Maintenance System on Escalators to Extend Service Life at Minangkabau International Airport | TOFEDU: The Future of Education Journal 5 (1), 100-105, 2026 | 0 | 2026 | |
| 44 | Google Scholar | Authors : A Fauzi, R Abu, M Mukhnizar | Analysis of Condition Monitoring for LRVP (Liquid Ring Vacuum Pump) Shaft Alignment Using Laser Alignment for Maintenance Actions at PT SEML | TOFEDU: The Future of Education Journal 5 (1), 1256-1263, 2026 | 0 | 2026 | |
| 45 | Google Scholar | Authors : U Khairi, R Abu, M Mukhnizar | Analysis of the Effect of the Cooling System Modification on the Engine Performance of the Wuling Confero | TOFEDU: The Future of Education Journal 4 (8), 4258-4266, 2025 | 0 | 2025 | |
| 46 | Google Scholar | Authors : NA El Islami, M Mukhnizar, Z Zulkarnain | The Analysis of Current Variation in TIG (Tungsten Inert Gas) Welding on the Tensile Test Results of Aluminum 5083 Plates | TOFEDU: The Future of Education Journal 4 (9), 5212-5219, 2025 | 0 | 2025 | |
| 47 | Google Scholar | Authors : M Anwar, M Mukhnizar, R Abu | HEAT TRANSFER ANALYSIS IN THE HIGH PRESSURE HEATER CFB BOILER OF PLTU TELUK SIRIH UNIT 2 | Journal of Scientech Research and Development 7 (2), 460-471, 2025 | 0 | 2025 | |
| 48 | Google Scholar | Authors : J Giano, R Abu, M Mukhnizar | Analysis of the Tempering Process Results with Temperature Variations on the Mechanical Properties of AISI 4340 Material Hardness | TOFEDU: The Future of Education Journal 4 (8), 4814-4820, 2025 | 0 | 2025 | |
| 49 | Google Scholar | Authors : R Riski, R Abu, M Mukhnizar | Analysis of the Effect of Artificial Aging on the Mechanical Properties of Al 2014 | TOFEDU: The Future of Education Journal 4 (9), 5220-5227, 2025 | 0 | 2025 | |
| 50 | Google Scholar | Authors : M Mukhnizar, MA Pratama, R Abu | THE EFFECT OF FEEDING AND MAIN CUTTING ANGLE ON THE SURFACE ROUGHNESS OF METAL RESULTING FROM FLAT TURNING ON ST 37 STEEL MATERIAL | Journal of Scientech Research and Development 7 (2), 452-459, 2025 | 0 | 2025 | |
| 51 | Penelitian | Mukhnizar; Rosnita Rauf | Pembangkit Energi Listrik Berbasis Semi Gerak Abadi Menggunakan Pasangan Roda Gigi Lurus |
Penelitian Kompetitif Nasional ( PSN Institusi ) Leader: Risal Abu Sumber: SIMLITABMAS SOURCE Status: Approved Dana: Rp73.000.000 |
2018 | ||
| 52 | Penelitian | Mukhnizar; Rosnita Rauf | Pembangkit Energi Listrik Berbasis Semi Gerak Abadi Menggunakan Pasangan Roda Gigi Lurus |
Penelitian Kompetitif Nasional ( PPT/Produk Terapan ) Leader: Risal Abu Sumber: SIMLITABMAS SOURCE Status: Approved Dana: Rp70.000.000 |
2017 | ||
| 53 | Garuda | Fitri, Annisa Rahmadani; Abu, Risal; Mukhnizar, Mukhnizar | Analysis of Maintenance System on Escalators to Extend Service Life at Minangkabau International Airport | The Future of Education Journal Vol 5 No 1 (2026)100-105 | 5 | 2026 | |
| 54 | Garuda | Fitri, Annisa Rahmadani; Abu, Risal; Mukhnizar, Mukhnizar | Analysis of Condition Monitoring for LRVP (Liquid Ring Vacuum Pump) Shaft Alignment Using Laser Alignment for Maintenance Actions at PT SEML | The Future of Education Journal Vol 5 No 1 (2026)100-105 | 5 | 2026 | |
| 55 | Garuda | Fitri, Annisa Rahmadani; Abu, Risal; Mukhnizar, Mukhnizar | Optimalisasi Sistem Perawatan pada Tumbler Drayer dengan Metode RCM di Hotel X | The Future of Education Journal Vol 5 No 1 (2026)100-105 | 5 | 2025 | |
| 56 | Garuda | Fitri, Annisa Rahmadani; Abu, Risal; Mukhnizar, Mukhnizar | Analysis of the Effect of the Cooling System Modification on the Engine Performance of the Wuling Confero | The Future of Education Journal Vol 5 No 1 (2026)100-105 | 5 | 2025 | |
| 57 | Garuda | Fitri, Annisa Rahmadani; Abu, Risal; Mukhnizar, Mukhnizar | Analysis of the Tempering Process Results with Temperature Variations on the Mechanical Properties of AISI 4340 Material Hardness | The Future of Education Journal Vol 5 No 1 (2026)100-105 | 5 | 2025 | |
| 58 | Garuda | Fitri, Annisa Rahmadani; Abu, Risal; Mukhnizar, Mukhnizar | The Analysis of Current Variation in TIG (Tungsten Inert Gas) Welding on the Tensile Test Results of Aluminum 5083 Plates | The Future of Education Journal Vol 5 No 1 (2026)100-105 | 5 | 2025 | |
| 59 | Garuda | Fitri, Annisa Rahmadani; Abu, Risal; Mukhnizar, Mukhnizar | Analysis of the Effect of Artificial Aging on the Mechanical Properties of Al 2014 | The Future of Education Journal Vol 5 No 1 (2026)100-105 | 5 | 2025 | |
| 60 | Garuda | Fitri, Annisa Rahmadani; Abu, Risal; Mukhnizar, Mukhnizar | Analisis Penyebab Kerusakan Mesin Diesel pada Generator Set untuk Tindakan Perawatan di Kapal Tanker MT. Sea Serenity | The Future of Education Journal Vol 5 No 1 (2026)100-105 | 5 | 2024 | |
| 61 | Garuda | Fitri, Annisa Rahmadani; Abu, Risal; Mukhnizar, Mukhnizar | Analisis Kinerja Kompressor Screw Oil Injected Sullair Ls20-150h untuk Ash Handling (Study Kasus PLTU Teluk Sirih) | The Future of Education Journal Vol 5 No 1 (2026)100-105 | 5 | 2024 | |
| 62 | Garuda | Fitri, Annisa Rahmadani; Abu, Risal; Mukhnizar, Mukhnizar | Pembuatan Mesin Pengiris Tempe | The Future of Education Journal Vol 5 No 1 (2026)100-105 | 5 | 2024 | |
| 63 | Garuda | Putra, Afrionaldi; Mukhnizar, Mukhnizar; Selviyanty, Veny; Abu, Risal; Afdal, Afdal | Pembuatan Tungku Pembakaran Logam | Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 7 No. 1 (2024): January483-487 | 5 | 2024 | |
| 64 | Garuda | Putra, Afrionaldi; Mukhnizar, Mukhnizar; Selviyanty, Veny; Abu, Risal; Afdal, Afdal | Perancangan Alat Uji Putaran Kritis Poros Menggunakan Digital Counter | Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 7 No. 1 (2024): January483-487 | 5 | 2024 | |
| 65 | Garuda | Putra, Afrionaldi; Mukhnizar, Mukhnizar; Selviyanty, Veny; Abu, Risal; Afdal, Afdal | Perancangan Tungku Pembakar Logam | Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 7 No. 1 (2024): January483-487 | 5 | 2024 | |
| 66 | Garuda | Putra, Afrionaldi; Mukhnizar, Mukhnizar; Selviyanty, Veny; Abu, Risal; Afdal, Afdal | Perancangan Alat Press Hidrolik Kapasitas 20 Ton | Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 7 No. 1 (2024): January483-487 | 5 | 2024 | |
| 67 | Garuda | Putra, Afrionaldi; Mukhnizar, Mukhnizar; Selviyanty, Veny; Abu, Risal; Afdal, Afdal | Analisis Kerusakan untuk Tindakan Perawatan pada Mekanika Elevator Otis Kapasitas 2 Ton di RSUP Dr M.Djamil Padang | Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 7 No. 1 (2024): January483-487 | 5 | 2024 | |
| 68 | Garuda | Putra, Afrionaldi; Mukhnizar, Mukhnizar; Selviyanty, Veny; Abu, Risal; Afdal, Afdal | Analisis Perbandingan Sifat Mekanik Sambungan Kampuh V Terhadap Kampuh U Hasil Pengelasan SMAW Menggunakan Posisi 3G pada Baja St 37 | Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 7 No. 1 (2024): January483-487 | 5 | 2024 | |
| 69 | Garuda | Putra, Afrionaldi; Mukhnizar, Mukhnizar; Selviyanty, Veny; Abu, Risal; Afdal, Afdal | Planning and Design of a Coffee Peeling Machine with a Capacity of 100 Kg/Hour | Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 7 No. 1 (2024): January483-487 | 5 | 2024 | |
| 70 | Garuda | Putra, Afrionaldi; Mukhnizar, Mukhnizar; Selviyanty, Veny; Abu, Risal; Afdal, Afdal | Pembuatan Mesin Tempa Logam Dengan System Forging Hammer | Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 7 No. 1 (2024): January483-487 | 5 | 2023 | |
| 71 | Garuda | Putra, Afrionaldi; Mukhnizar, Mukhnizar; Selviyanty, Veny; Abu, Risal; Afdal, Afdal | ANALISIS PERFORMA HEAT EXCHANGER OIL COOLER UPPER TIPE M10-BFG PADA UNIT 1,2,3,4 PLTA SINGKARAK UNTUK TINDAKAN PEMELIHARAAN | Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 7 No. 1 (2024): January483-487 | 5 | 2023 | |
| 72 | Garuda | Putra, Afrionaldi; Mukhnizar, Mukhnizar; Selviyanty, Veny; Abu, Risal; Afdal, Afdal | Pengujian Mesin Tempa Logam Dengan Sistem Forging Hammer | Jurnal Teknik Industri Terintegrasi (JUTIN) Vol. 7 No. 1 (2024): January483-487 | 5 | 2023 | |
| 73 | Garuda | Muhammad Rafly Ramadhan; Risal Abu; Mukhnizar; Afdal; Zulkarnain | PENGUJIAN ALAT UJI PUNTIR | Journal of Scientech Research and Development Vol 5 No 1 (2023): JSRD, June 2023465-476 | 6 | 2023 | |
| 74 | Garuda | Muhammad Rafly Ramadhan; Risal Abu; Mukhnizar; Afdal; Zulkarnain | Analisis Kenaikan Temperature pada Turbine Guide Bearing untuk Pemeliharaan Periodik Unit 2 PLTA Maninjau | Journal of Scientech Research and Development Vol 5 No 1 (2023): JSRD, June 2023465-476 | 6 | 2023 | |
| 75 | Garuda | Muhammad Rafly Ramadhan; Risal Abu; Mukhnizar; Afdal; Zulkarnain | Analisis Perbaikan dan Pemeliharaan Sistem Pendingin (Air Conditioner) Pada Mobil Jazz New | Journal of Scientech Research and Development Vol 5 No 1 (2023): JSRD, June 2023465-476 | 6 | 2023 | |
| 76 | Garuda | Muhammad Rafly Ramadhan; Risal Abu; Mukhnizar; Afdal; Zulkarnain | Perencanaan Mesin Pembuat Serbuk Jahe | Journal of Scientech Research and Development Vol 5 No 1 (2023): JSRD, June 2023465-476 | 6 | 2023 | |
| 77 | Garuda | Muhammad Rafly Ramadhan; Risal Abu; Mukhnizar; Afdal; Zulkarnain | Analisis Torsi Sepeda Motor Vixion New 2013 Menggunakan Final Drive Gear Ukuran 13, 14 dan 15 | Journal of Scientech Research and Development Vol 5 No 1 (2023): JSRD, June 2023465-476 | 6 | 2023 | |
| 78 | Garuda | Muhammad Rafly Ramadhan; Risal Abu; Mukhnizar; Afdal; Zulkarnain | Analisis Penyebab Over Heating Untuk Tindakan Perawatan Pada Screw Compressor Di PT. Semen Padang Unit Indarung IV | Journal of Scientech Research and Development Vol 5 No 1 (2023): JSRD, June 2023465-476 | 6 | 2023 | |
| 79 | Garuda | Muhammad Rafly Ramadhan; Risal Abu; Mukhnizar; Afdal; Zulkarnain | Analisis Penyebab Turunnya Kinerja Kompresor untuk Tindakan Perawatan pada Kapal Tanker MT. Sea Serenity | Journal of Scientech Research and Development Vol 5 No 1 (2023): JSRD, June 2023465-476 | 6 | 2023 | |
| 80 | Garuda | Muhammad Rafly Ramadhan; Risal Abu; Mukhnizar; Afdal; Zulkarnain | Pembuatan Alat Uji Putaran Kritis Poros | Journal of Scientech Research and Development Vol 5 No 1 (2023): JSRD, June 2023465-476 | 6 | 2023 | |
| 81 | Garuda | Muhammad Rafly Ramadhan; Risal Abu; Mukhnizar; Afdal; Zulkarnain | ANALISIS PERAWATAN INJECTION PUMP PADA MOTOR DIESEL | Journal of Scientech Research and Development Vol 5 No 1 (2023): JSRD, June 2023465-476 | 6 | 2023 | |
| 82 | Garuda | Muhammad Rafly Ramadhan; Risal Abu; Mukhnizar; Afdal; Zulkarnain | PEMBUATAN ALAT PEMOTONG PLAT MANUAL | Journal of Scientech Research and Development Vol 5 No 1 (2023): JSRD, June 2023465-476 | 6 | 2023 | |
| 83 | Garuda | Mukhnizar | PENGARUH ARUS PENGELASAN METAL INERT GAS (MIG) TERHADAP KEKUATAN TARIK BAJA ST 37 DENGAN VARIASI ARUS LISTRIK (150, 200, 250 AMPERE | Journal of Scientech Research and Development Vol 4 No 1 (2022): JSRD, June 2022033-048 | 6 | 2022 | |
| 84 | Garuda | Mukhnizar | Perencanaan Mesin Pengupas Kulit Kacang Tanah Kapasitas 800 kg/jam | Journal of Scientech Research and Development Vol 4 No 1 (2022): JSRD, June 2022033-048 | 6 | 2022 | |
| 85 | Garuda | Mukhnizar | PERENCANAAN MESIN SERUT BAMBU KAPASITAS 500 BATANG/JAM | Journal of Scientech Research and Development Vol 4 No 1 (2022): JSRD, June 2022033-048 | 6 | 2022 | |
| 86 | Garuda | Mukhnizar | Contribution of Pedagogical Competence and Transformational Leadership of the Principal to the Implementation of the Tasks of Design and Build Teachers at SMKN 1 Padang | Journal of Scientech Research and Development Vol 4 No 1 (2022): JSRD, June 2022033-048 | 6 | 2022 | |
| 87 | Garuda | Mukhnizar | Perencanaan Mesin Pemipih Biji Melinjo Kapasitas 650 Kg/Jam | Journal of Scientech Research and Development Vol 4 No 1 (2022): JSRD, June 2022033-048 | 6 | 2022 | |
| 88 | Garuda | Mukhnizar | Perencanaan Mesin Tempa Logam Dengan Sistem Forging Hammer | Journal of Scientech Research and Development Vol 4 No 1 (2022): JSRD, June 2022033-048 | 6 | 2022 | |
| 89 | Garuda | Mukhnizar | Analisis Pengaruh Variasi Kecepatan Rata-Rata Konstan Sepeda Motor Yamaha Bensin 4-Langkah Terhadap Konsumsi Bahan Bakar | Journal of Scientech Research and Development Vol 4 No 1 (2022): JSRD, June 2022033-048 | 6 | 2022 | |
| 90 | Garuda | Mukhnizar | Contribution of Pedagogical Competence and Transformational Leadership of the Principal to the Implementation of the Tasks of Design and Build Teachers at SMKN 1 Padang | Journal of Scientech Research and Development Vol 4 No 1 (2022): JSRD, June 2022033-048 | 6 | 2022 | |
| 91 | Garuda | Mukhnizar | PERILAKU PENGRAJIN GULA MERAH TEBU TRADISIONAL DI NAGARI BUKIK BATABUAH, KECAMATAN CANDUANG, KABUPATEN AGAM | Journal of Scientech Research and Development Vol 4 No 1 (2022): JSRD, June 2022033-048 | 6 | 2016 |
Sumber data: SINTA, per 15 April 2026
© 2025 LPPM Universitas Ekasakti. All rights reserved.
© 2025 LPPM Universitas Ekasakti. All rights reserved.
